Smart Home Installation & Pre-Wiring in Vancouver, WA
Infrastructure First — No Proprietary Lock-In
CRM Services installs the smart home infrastructure that actually lasts: hardwired smart switches, structured Cat6 wiring, whole-home leak detection with automatic shutoff, humidity-sensing ventilation, permanent LED exterior lighting, and the pre-wiring that makes future upgrades an afternoon project instead of a demolition job. We serve homeowners, rental owners, and property managers across Vancouver, WA and Clark County.
Our philosophy is different from the typical smart home installer: we don't sell you a proprietary automation platform with a service contract. We build platform-agnostic infrastructure — the wiring, conduit, dedicated circuits, and hardwired devices — so you can use whatever ecosystem you prefer (Apple Home, Google Home, Alexa, or Home Assistant) and swap endpoints as technology improves. The walls-open moment of a remodel is the cheapest time to do this work, which is why smart home scope pairs naturally with our kitchen, bathroom, and addition projects — but we also take on standalone installations like leak detection systems and permanent LED lighting.
Where scope requires new circuits or panel work, Washington's specialty licensing rules apply — we schedule and contract that electrical work through trusted licensed partners under our project management, the same way we run our remodels. One point of contact, one schedule, one accountable contractor.
Transparent ranges
Ranges reflect typical Vancouver-area projects and include installation. Pre-wiring is dramatically cheaper during a remodel while walls are open — ask about smart home scope during any kitchen, bathroom, or addition estimate.
Our process
Walkthrough & Priorities
We walk your home (or your remodel plans), talk through how you actually live — work-from-home needs, security concerns, rental turnover pain points — and identify which infrastructure earns its cost and which trends to skip.
Infrastructure Plan & Estimate
You get a line-item estimate separating infrastructure (wiring, conduit, circuits) from endpoints (switches, sensors, devices), so you can phase the spend. If the work rides along with a remodel, it's integrated into the project schedule.
Rough-In
Cat6 runs, low-voltage cable, conduit to camera locations, C-wire for the thermostat, and dedicated circuits — installed while walls are open. New-circuit and panel work is performed by our licensed electrical partners under our scheduling and oversight.
Device Installation & Setup
Switches, leak detection, thermostats, fans, and lighting installed, connected to your platform of choice, and tested. We configure automatic shutoff thresholds on leak systems and program permanent LED presets before we leave.
Walkthrough & Documentation
We label the wiring panel, document what's installed where, and walk you through everything. You own the system — no service contract, no proprietary lock-in, and a clear map for whoever upgrades it in ten years.
Do you install full home automation systems like Control4?+
No, by design. Proprietary whole-home platforms require expensive hubs, professional programming, and ongoing service contracts, and they lock you into one vendor's ecosystem. We install standards-based infrastructure and devices that work with Matter and the major platforms — Apple Home, Google Home, Alexa, or Home Assistant — so you're never dependent on a single installer or brand.
Is whole-home leak detection worth it in Vancouver, WA?+
For most homeowners, yes. A whole-home leak detection system with automatic shutoff monitors your main water line, catches anomalies like a burst supply line or running toilet, and shuts the water off before a $5,000+ damage event. Insurance carriers often offer 5–10% policy discounts for installed systems, which offsets a meaningful share of the $500–$800 device cost. For rentals and homes that sit empty during vacations, it's one of the highest-value upgrades available.
Can I add smart home wiring outside of a remodel?+
Yes — leak detection systems, smart switches, thermostats, and permanent LED lighting all install cleanly in finished homes. The economics change for in-wall wiring: a Cat6 drop that costs $50–$100 during a remodel runs $200–$400 to retrofit because of wall fishing and drywall patching. If a remodel is anywhere on your horizon, bundle the wiring with it.
Do you handle the electrical work yourself?+
Device installation, low-voltage wiring, and mounting are handled by our crew. New circuits, panel work, and EV charger circuits require specialty state licensing in Washington, so we schedule and contract those scopes through trusted licensed electrical partners working under our project schedule and oversight — the same model we use on every remodel.
What smart home features do property managers actually use?+
Three things earn their keep in rentals: whole-home leak detection (water damage is the most expensive common rental claim), smart locks (no re-keying between tenants), and smart thermostats (protect the property from freeze events and manage vacant-unit costs remotely). We install turnover-friendly packages for property managers across Clark County.
What is permanent LED exterior lighting?+
Discreet LED channels installed under your eaves that replace ladder-hung seasonal lights permanently. Program warm white for everyday curb appeal, then switch to presets for Christmas, Halloween, or game day from your phone. Typical Vancouver-area installations run $3,000–$6,000 depending on rooflines, and eliminate the annual ladder ritual for good.
Let's price your project.
Free onsite consultation and a line-item estimate you can actually read — usually same day to 48 hours, depending on scope.