Dry Rot Repair & Restoration in Vancouver, WA
Stop the Damage Before It Spreads
Dry rot is one of the most common — and most misunderstood — problems facing Pacific Northwest homeowners. The constant moisture in Vancouver, WA creates ideal conditions for wood-destroying fungi, and by the time you see the damage on the surface, it's often already spread behind your siding, into your sheathing, and sometimes into your framing.
Most contractors treat dry rot as a cosmetic problem — they patch the surface and move on. CRM Services takes a different approach. We diagnose the ROOT CAUSE of every rot issue: missing or improperly installed kickout flashing, failed caulking at siding intersections, improper siding clearance to grade, gutter failures directing water behind siding, or damaged house wrap. We don't just fix the symptom — we fix why it happened.
With 30+ years of experience in the trades and a background in property management maintenance, we've seen every type of rot damage. From minor trim repairs to full structural sheathing replacement, CRM Services handles the complete scope — and we do it right the first time.
Transparent ranges
Source: National averages adjusted for Vancouver WA market, 2026
Our process
Free Inspection & Assessment
We inspect the visible damage and probe surrounding areas to determine the full extent of rot. We check flashing, caulking, clearances, and drainage — not just the surface.
Root Cause Diagnosis
We identify what caused the moisture intrusion: missing kickout flashing, failed caulking, improper grade clearance, gutter failure, or damaged weather barrier.
Transparent Estimate
You receive a detailed, line-item estimate covering both the rot repair and the root cause correction. No hidden charges, no vague bids.
Complete Repair & Prevention
We remove all damaged material, repair structural components as needed, correct the moisture source, and restore the exterior to match.
Documentation & Follow-Up
Photo documentation of all work completed. We provide maintenance recommendations to prevent future rot issues.
How much does dry rot repair cost in Vancouver, WA?+
Dry rot repair costs in Vancouver, WA range from $500 for minor trim patches to $12,000+ for extensive structural damage involving sheathing and framing. The final cost depends on how far the rot has spread — which often can't be fully determined until the damaged area is opened up. CRM Services includes a root cause assessment with every repair, so you're not just paying to patch a symptom.
How do I know if I have dry rot behind my siding?+
Warning signs include blistered, cracked, or peeling paint; darkened or discolored wood; soft spots when you press on trim or siding; a musty smell near exterior walls; and visible fungal growth. Check around window frames, door frames, where the roof meets the wall, and any area where siding intersects with other materials. If you're unsure, CRM Services offers free inspections.
What causes dry rot in Pacific Northwest homes?+
The most common causes in Vancouver, WA are: missing or improperly installed kickout flashing at roof-to-wall transitions, failed caulking at siding intersections (window-to-siding, siding-to-cornerboard), improper siding clearance to the ground or deck surfaces, gutter failures directing water behind siding, and damaged or missing house wrap. The Pacific Northwest's constant moisture means even small water intrusion points can cause significant rot over time.
Can dry rot spread to other parts of my house?+
Yes. Dry rot fungi spread through wood via microscopic filaments called hyphae. Once established, rot can travel along framing members, from siding into sheathing, and from exterior walls into interior structures. The longer it goes untreated, the more extensive — and expensive — the repair becomes. Early detection and repair is critical.
How can I prevent dry rot on my Vancouver home?+
Annual maintenance is the best prevention: inspect all caulking at siding intersections and replace any that's cracked or pulling away; ensure kickout flashing is installed at every roof-to-wall transition; maintain proper siding clearance (6+ inches from grade); clean gutters regularly and ensure they're directing water away from the house; and check paint and finish for early signs of moisture penetration. CRM Services offers seasonal maintenance inspections to catch problems before they become costly repairs.
What's the difference between dry rot and wet rot?+
Both are caused by fungi that break down wood, but they thrive in different moisture conditions. Wet rot requires consistently high moisture (typically 50%+) and stays localized to the wet area. Dry rot can survive at lower moisture levels (20-30%) and spreads more aggressively through otherwise dry wood. In the Pacific Northwest, we see both — but dry rot is more concerning because it can spread further from the original moisture source. The repair approach is similar: remove all damaged material, fix the moisture source, and restore.
Let's price your project.
Free onsite consultation and a line-item estimate you can actually read — usually same day to 48 hours, depending on scope.
